Netgear_ext Not Showing on Network List

How to Fix Netgear_ext Not Showing on Network List Issue?

Is your Netgear_ext not visible on the Network list? If yes, then this is the right place for you as here we have managed to pull together all the important information through which you can easily resolve Netgear_ext not working issue. Just browse the below section to know about the possible solutions.

Troubleshooting Solutions

Reboot Your Netgear Extender

First and foremost, consider rebooting your Netgear extender before implementing any other troubleshooting hacks. As it will eliminate minor technical issues that might be causing the Netgear_ext not showing on the network list issue.

To Reboot:

  • You are required to disconnect all your WiFi-enabled devices from your extender and turn it off.
  • Unplug it from the power source and set it aside for a while.
  • Next, you need to turn on your Netgear extender after connecting it again to the power socket.
  • Now, connect your WiFi-enabled device to your extender to enjoy high-speed internet.

Now, check whether the Netgear_ext not showing on the network list issue has been fixed. If not, then keep reading.

Check Your Internet Connection

Ensure that your Netgear extender is getting a stable internet network to work properly. If you are using a wired connection, then consider inspecting the condition of the Ethernet cable as it needs to be free from any kind of damage for working efficiently. If you find any issue, then swap or replace it with the new one. While using a wireless connection, make sure that the wireless extender you are using is getting proper WiFi signals. If not, then try relocating your Netgear extender close to your home router to avoid any loss of connection.

Important Note: Always prefer a wired connection, while accessing the page to avoid any connection loss issue.

Check the Power Source

A stable power supply is required for the Netgear WiFi extender to work smoothly. To confirm that, you are required to check the electrical socket through which your extender is connected. Any damaged or short-circuited power socket can cause a power outage. If that’s the case, then try switching to another socket to avoid any similar kinds of issues. Moreover, don’t forget to examine the condition of the Ac cable as it needs to be free from any kind of damage for smooth functioning.

Update Netgear Extender Firmware

Using an outdated version of Netgear extender firmware can also be one of the reasons behind the outcome of Netgear_ext not showing on the network list issue. Therefore, in order to fix the issue, it’s recommended to upgrade your Netgear extender to the most recent version. However, many netizens lack the proper knowledge to update the firmware of their Netgear extender. If you are also the one, then we suggest you follow the below-mentioned procedure to update the Netgear extender firmware without any trouble.

To update:

  • Switch on your extender and your computer device.
  • On your computer, access an updated version of the web browser and type in the address field.
  • Hit Enter.
  • You will be directed to the Netgear extender login page where you are required to insert the default username and password in their specific field and click the Log In button.
  • Once you have successfully logged in, take your cursor to the Advanced tab, click Administration and select Firmware Update.
  • Now, click Check to look for the new updates.
  • If the new updates are available, click Yes to start the updating process.
  • Next, you simply need to follow the on-screen instructions to complete the Netgear extender firmware update.

Finally, your Netgear extender firmware is updated to the latest version.

Reset and Re-configure Your Extender

This is the last resort when nothing works for you. Resetting your Netgear extender to the default factory settings and re-configure it from the scratch can eliminate minor or major issues that might be spoiling your internet experience. To reset, you just need a pin-pointed object to press and hold the Reset button located on your Netgear extender until the power LED starts blinking. Then, your Netgear WiFiextender will restart automatically and will be restored to default factory settings.

Now, re-configure your Netgear router to access the Netgear Genie setup wizard to get high-speed internet services.

By walking through the aforementioned troubleshooting hacks, you will be able to resolve Netgear_ext not showing on the network list issue.

Read More :

Similar Posts